Manufacturing and Import/Export
制造与进出口
English article
Effective 1 September 2018, the Sales Tax Act 2018 and Service Tax Act 2018 with their subsidiary legislation replaced the Goods and Services Tax Act 2014. This guide assists registered manufacturers and industries (excluding automotive) on sales tax for manufactured and imported goods. Sales tax is a single-stage tax on finished goods manufactured in Malaysia and goods imported into Malaysia. It applies when a registered manufacturer's taxable goods are sold, disposed of otherwise than by sale, or used otherwise than as materials in manufacturing taxable goods, and on imports when goods are declared at clearance. Manufacturers of taxable goods with sales value exceeding RM500,000 within 12 months must register under Section 12 of the Sales Tax Act 2018; those at RM500,000 and below may register voluntarily under Section 14. Subcontractors whose total labour charge exceeds RM500,000 within 12 months must also register under Section 12. Under Section 3, manufacturing is changing organic or inorganic materials, manually or mechanically, into a new product by changing the size, shape, composition, properties or quality of the material. It also covers installing tools and components into machines, such as assembling a personal computer and television. Changing the quality of finished goods into a new product is manufacturing too, such as hot-dip galvanizing, chroming, electroplating and subcontract painting of goods sent by another manufacturer, where only a labour fee is charged. Hot-dip galvanizing coats fabricated steel with zinc by immersion in molten zinc, while petroleum manufacturing covers separation, conversion, purification and blending of refinery and petrochemical streams such as MTBE. A simple process such as combining two or three tools or components with screws on a machine is not manufacturing, provided the machine is complete, no extra materials are used and installation is quick. Taxable goods manufactured and manufacturing in Designated Areas and Special Areas are not subject to sales tax under Sections 49 and 56. Subcontractors normally do work given by another manufacturer, which supplies raw materials or semi-finished goods, and registered manufacturers may appoint subcontractors through the MySST system. Where unfinished goods are sent to another registered manufacturer and acquired back, they are subject to sales tax unless exempt under item 5, Schedule C of the Sales Tax (Persons Exempted from Payment of Tax) Order 2018. Where goods are sent from a registered manufacturer to a non-registered manufacturer for further work or completion, the finished goods acquired back are subject to sales tax unless exemption is claimed under item 62, Schedule A of the Sales Tax (Persons Exempted from Payment of Tax) Order 2018.
中文内容
自2018年9月1日起,《2018年销售税法》与《2018年服务税法》及其附属法例取代《2014年商品与服务税法》。本指南协助注册制造商及相关行业(汽车业除外)了解所制造与进口货物、以及制成品销售与运输的销售税。 马来西亚的销售税为单一阶段税,对在马来西亚制造的制成品及进口货物征收。当注册制造商的应税货物被售出、以销售以外方式处置,或并非作为制造应税货物的材料而使用时,即须缴税。就进口而言,在货物报关并于清关时缴付关税或税务时征收。 在12个月内销售值超过500,000令吉的应税货物制造商,须根据《2018年销售税法》第12条注册;销售值为500,000令吉及以下者可依第14条自愿注册。分包工程总劳务费在12个月内超过500,000令吉的分包商亦须依第12条注册。 根据第3条,制造是以人工或机械方式改变有机或无机材料,通过改变尺寸、形状、成分、性质或品质而制成新产品的过程。制造亦涵盖将工具与部件安装到机器或设备,例如个人电脑与电视机的组装。 改变制成品品质使其成为新产品亦属制造,如热浸镀锌、镀铬、电镀,以及为另一制造商送来的货物(如汽车车身套件)喷漆的分包工作,而仅收取劳务费。热浸镀锌将制作好的钢材浸入熔融锌以形成保护性锌层,包括表面处理、镀锌与检验三个步骤。石油制造涵盖炼油流(重整油、异构化油、处理石脑油)与石化流(如MTBE)的分离、转化、提纯与混合。 简单过程,如用螺丝将两三个工具或部件组合到机器上,不属制造,前提是机器完整、未使用额外材料且安装可轻易快速完成。在指定区与特别区内制造应税货物及进行的制造活动,按第49及56条无须缴纳销售税。 分包商通常承接另一制造商给予的工作,由其提供原材料或半制成品,注册制造商可通过MySST系统委任分包商。若未完成货物送至另一注册制造商,而制成品其后购回,须缴税,除非根据《2018年销售税(免税人士)命令》附表C第5项获豁免。 若货物由注册制造商送至非注册制造商进行进一步加工或完成,其后购回的制成品须缴税,除非该非注册制造商根据同一命令附表A第62项申请豁免。
MyTax Info
More practical e-Invoice updates

